CGI Construction Service Nationwide

Why Redwood City Homeowners Choose CGI Construction

Rowan Construction Group Redwood City provides independent CGI cabinet and construction service across the Peninsula, from historic craftsman neighborhoods to Redwood Shores bay-fill homes, and we also offer Cgi service in Menlo Park for homeowners in that area. We are not affiliated with or authorized by CGI; our expertise comes from fifteen-plus years installing, repairing, and replacing their product lines in local kitchens where particleboard cores meet slow leaks and thermofoil edges meet summer heat. Call (650) 560-7228 to schedule a free estimate with a written price before any work starts.

Call (650) 560-7228

CGI cabinets show up frequently in Redwood City remodels because their RTA and plywood-core lines hit a practical price point for the mid-Peninsula’s active renovation market, and we also handle Cgi repair in Redwood City for existing installations. We’ve installed them in Stambaugh-Heller craftsman updates, in 1960s ranch kitchen refreshes near Woodside Road, and in Redwood Shores townhomes where differential settlement from the underlying bay fill makes level installation a real challenge. That range of conditions teaches you what holds up and what doesn’t.

Why Trust Rowan Construction Group Redwood City for Your CGI Construction?

Our crew knows CGI products from the inside of the box out. We’ve assembled their Ready-to-Assemble line, hung their Euro-style frameless boxes on walls that weren’t plumb, and shimmed their Shaker doors over Redwood City floors that had settled half an inch from the kitchen to the dining room. Grant Rowan, our owner, trained in construction technology at Los Angeles Trade-Technical College before putting in years on Bay Area job sites, and he’s kept a running list of every project where something didn’t go as planned - not as punishment, but because he thinks the list is the whole point. That list includes a CGI RTA sink base that swelled because we didn’t catch a slow drain leak during demo, and we changed our moisture-check protocol the next day.

We source genuine CGI replacement hinges, glides, and door fronts when they’re available, but we don’t pretend to be a CGI dealer. Our value is diagnostic: we can tell you whether your swollen cabinet box is a one-off repair or a symptom of a bigger moisture problem, and we’ll put that assessment in writing with a flat price before anyone picks up a tool. Under Clause 1 of The Haven Standard, the price is always written before work starts. Every crew member is background-checked and uniformed; every visit includes a documented photo record as standard; and a live person answers our phone 24/7.

Common CGI Construction Problems We Fix in Redwood City

• Particleboard core swelling around sink bases. CGI’s RTA line uses particleboard cores in many base cabinets, and in Redwood City’s older homes with original galvanized drains, slow leaks are common. The particleboard swells, crumbles, and loses screw-holding strength. We see this most in pre-1940 homes near downtown where drain lines have decades of buildup. The fix ranges from localized box replacement to full sink-base rebuild, depending on how far the moisture traveled.
• Thermofoil door delamination at edges. CGI’s thermofoil door styles - common in their budget-friendly lines - separate at the edges when exposed to sustained heat or poor ventilation. Redwood City’s coastal fog gap means more sunny days than San Mateo, and west-facing kitchens without range hoods are repeat offenders. Once the seam opens, moisture gets under the film and the delamination spreads. We can replace individual doors with matching CGI fronts or source aftermarket equivalents when the color has been discontinued.
• Soft-close glide failure from overloading. CGI’s soft-close drawer glides are decent hardware, but they’re not rated for the weight of a drawer full of cast-iron cookware. We regularly find glides that have lost their dampening action because the ball bearings have flattened their races. The repair is straightforward - replacement glides, properly spec’d for actual load - but we also check whether the drawer box itself has racked from the weight.
• Door misalignment from out-of-level floors. Redwood City’s hillside neighborhoods, Emerald Hills and Farm Hill especially, have homes where the original slab or post-and-pier foundation has settled unevenly. CGI’s Euro-style frameless cabinets have tight reveal tolerances, and a floor that’s 3/8 inch out of level over an eight-foot run means doors that rub or won’t close. Our fix: shim the toekick and cabinet bases properly, then adjust hinges. In Redwood Shores, we’ve also seen differential settlement from the bay fill cause similar issues years after a clean initial install.
• Hardware screw stripping in MDF face frames. CGI’s RTA cabinets sometimes use MDF face frames with pre-drilled hardware holes. After a few hinge adjustments, the screw holes wallow out and the hinge plate won’t hold. We repair this with hardwood dowel inserts and fresh pilot holes, or relocate the hinge plate entirely if the door layout allows.

Before

After

CGI Parts & Our Repair-vs-Replace Approach

We stock common CGI replacement parts locally for fast turnaround: hinge plates, soft-close glides, door bumpers, and standard Shaker and raised-panel door fronts in white and common wood tones. For discontinued colors or thermofoil patterns, we source aftermarket equivalents from our vetted supplier list - fifty-plus brands - and we match fit and finish before we quote.

The repair-vs-replace decision is where our field experience matters. A single swollen sink base in an otherwise sound kitchen gets a localized replacement, re-leveled and sealed properly. But when we find three or more cabinets with particleboard swelling, or thermofoil delamination spreading across multiple doors, we recommend partial or full replacement. Repeated repairs on deteriorating substrate wastes money. We’ll show you the cost comparison using our standard ranges: cabinet installation runs $4,000-$13,000, countertops $2,000-$6,500, and our Kitchen Remodeling services run $14,000-$45,000. Call (650) 560-7228 and we’ll walk through the numbers on your specific layout.

Our CGI Service Process - Step by Step

1. 1
   Diagnosis with photo documentation. We inspect every cabinet box, door, hinge, and glide. We check for moisture intrusion, level the floor runs with a laser, and photograph everything. You get the photo record before we leave - standard, not an upgrade.
2. 2
   Written scope and flat price. Under The Haven Standard, Clause 1, you receive a written price with a detailed scope before any work starts. No “call for a quote” - the number is on the page, in dollars.
3. 3
   Repair or install with OEM-compatible parts. We use genuine CGI parts when available; aftermarket equivalents when they’re not. Every screw, shim, and seal is documented.
4. 4
   Function test and alignment check. Every door, every drawer, every soft-close mechanism gets cycled ten times. We check reveals with a feeler gauge on frameless installs.
5. 5
   Warranty and photo record delivery. The 365-Day Done Right Promise applies to all CGI work. You leave with a written warranty, the photo record, and our direct line. If it’s not done right, we make it right.

CGI Products We Service & Install in Redwood City

We work with CGI’s full residential line: Ready-to-Assemble (RTA) cabinets for budget-conscious updates; All-Wood Plywood cabinets for moisture-prone areas like Redwood Shores homes near the water, plus Cgi in San Carlos for nearby properties; Euro-Style Frameless cabinets for modern kitchen layouts; and Shaker and Raised-Panel door styles across painted, stained, and thermofoil finishes. We stock common sizes and hardware locally, and we can source special-order items with clear lead times quoted upfront.

Our CGI work typically ties into broader kitchen projects: cabinet installation and refacing, quartz and granite countertops from Cambria, Caesarstone, or Silestone, and full kitchen remodeling with tile backsplashes and island builds. In a Redwood City ranch home, our crew replaced a failing CGI RTA sink base cabinet that had swollen from a slow drain leak, then installed new plywood-core CGI cabinets with quartz countertops and a tile backsplash. We re-leveled the floor framing to ensure proper door alignment and finished with soft-close hinges throughout. The client chose a refaced look for the remaining uppers, saving on material costs while upgrading function.

We Also Service These Brands

Rowan Construction Group Redwood City is not a single-brand shop. We install and repair KraftMaid and Wellborn cabinets, fabricate Cambria and Caesarstone countertops, and source Kohler and Toto fixtures - fifty-plus vetted brands total. That breadth means your written quote uses honest numbers, not inflated single-source pricing.

FAQs - CGI Construction Service in Redwood City

Is Rowan Construction Group Redwood City authorized by CGI?

No. We are an independent construction firm with no affiliation or authorization from CGI. Our expertise comes strictly from field experience installing, repairing, and replacing CGI products in Peninsula homes since 2007. Call (650) 560-7228 for a free estimate.

Can you repair water-swollen CGI particleboard cabinets or do they need full replacement?

Localized swelling can sometimes be repaired with a custom box insert, but particleboard that has crumbled or delaminated structurally cannot be restored. We assess moisture penetration depth and screw-holding strength, then recommend repair or replacement with a clear cost comparison. Call (650) 560-7228 and we’ll inspect yours.

Are CGI cabinets suitable for Redwood City’s humid winters and dry summers?

CGI’s plywood-core lines handle our climate well; their particleboard RTA line needs careful sealing around sinks and dishwashers. Redwood City’s coastal fog gap creates sharper humidity swings than fog-belt neighbors, so we specify plywood for sink bases and add ventilation checks for thermofoil doors in west-facing kitchens.

What’s the typical cost to install a full set of CGI kitchen cabinets in a Redwood City home?

CGI cabinet installation typically runs $4,000-$13,000 depending on kitchen size, line selection, and whether we re-level existing framing. A full kitchen remodel with CGI cabinets, countertops, and backsplash runs $14,000-$45,000. Here’s our standard line-item breakdown:

Call (650) 560-7228 for a written quote on your specific layout - estimates are free.

How do you handle CGI cabinet door delamination or thermofoil peeling?

We replace delaminated doors with genuine CGI fronts when available, or matched aftermarket equivalents when the color has been discontinued. For kitchens with multiple failing doors, we often recommend a refacing package that upgrades to a more durable painted or wood door while keeping sound boxes. The field vignette above shows this approach in practice.

Do you use OEM CGI parts for hinge and glide replacements?

Yes, when available and cost-effective. For discontinued hardware or faster turnaround, we use high-quality aftermarket glides and hinges that match CGI’s mounting patterns and weight ratings. We specify which we’re using in your written scope, never bait-and-switch.

Book Your CGI Service in Redwood City, CA

Call (650) 560-7228 to schedule your free estimate. We’ll inspect your CGI cabinets, deliver a written flat price with scope details, and start work only after you’ve reviewed and approved the number. Measure twice, document once, build it so it doesn’t come back. That’s how we’ve kept projects within a few percent of the agreed price across 4,000-plus jobs since 2007.

Written by Grant Rowan, Owner at Rowan Construction Group Redwood City, serving Redwood City since 2007.