Barrette Roofing Nationwide

Barrette Roofing: The Redwood City Owner’s Guide

Barrette-compatible roofing repair in Redwood City typically runs $400-$1,800 installed, and we stock common Barrette flashing, ridge vent, and underlayment components on our trucks. Most Barrette roof systems we see in Redwood City were installed between 2008 and 2018, and the first failures usually show up at the valley flashing or the ridge vent seals. Homeowners usually notice the problem after a hard Peninsula rain, when water spots appear on ceiling drywall near the chimney or where two roof planes meet.

Call (650) 560-7228

Which Barrette Models This Applies To

Barrette manufactured roofing under the Barrette Outdoor Living umbrella, primarily distributing through Lowe’s and regional lumberyards. The systems we encounter in Redwood City fall into three product lines: the Barrette Architectural shingle series (discontinued around 2016), the Barrette 3-Tab line, and the Barrette metal roofing profiles sold in limited West Coast markets. The critical compatibility issue is the ridge vent width - Barrette’s 10-inch external baffle ridge vent (their standard spec) does not interchange with the 9-inch or 12-inch profiles common from GAF or Owens Corning without modifying the ridge cap exposure.

To identify your exact system, check the shingle bundle wrapper if you have leftover stock in the garage, or look for the manufacturing date stamp on the shingle back (visible from the attic on the top course). The Barrette metal line used a proprietary snap-lock standing seam with a 1.75-inch rib height - aftermarket panels with a 2-inch rib will not seat correctly in the existing clips. We source OEM-equivalent flashing from Quality Edge and Lomanco, both of which match Barrette’s original gauge and finish specs without the discontinued-part premium.

Signs Your Barrette Roofing Is Failing

• Water staining on interior drywall below valleys or chimneys. Barrette’s valley flashing in the architectural line used a lighter-gauge aluminum (0.019 inch) than the industry standard 0.024 inch, which fatigues faster under Redwood City’s thermal cycling. The gap opens slowly, so the leak often runs for months before visible damage appears.
• Granule loss exposing the asphalt mat, especially on south-facing slopes. The Barrette 3-Tab line carried a 20-year warranty but used a thinner asphalt layer than comparable Owens Corning Supreme shingles. In Redwood City’s sun exposure, we see accelerated granule shedding around year 12-14, well before the warranty period ends.
• Ridge vent tabs lifting or detaching at the ends. Barrette’s ridge vent used a plastic fastener clip that becomes brittle after 8-10 years of UV exposure. Once the clip cracks, wind uplift pulls the vent section free and creates an open slot for driven rain.
• Corrosion spotting on metal roofing at fastener lines. The Barrette metal line specified painted steel with a 30-year finish warranty, but the EPDM washer under the screw head degrades faster in coastal Peninsula humidity. We replace these with stainless fasteners and fresh butyl washers.
• Soffit staining or mold near the eaves. This indicates the Barrette underlayment (typically a standard #15 felt in original installs) has failed at the eave edge, allowing moisture into the attic space. Redwood City’s winter fog pattern keeps the lower roof edge damp for weeks at a time.

Before

After

Replacement Cost & What’s Included

Barrette roofing repair in Redwood City breaks down as follows:

The range depends on roof pitch (steeper = more labor), deck condition if plywood needs replacement, and whether we match existing shingle color from salvage stock or transition to a new compatible line. Every quote is a flat written price with a written scope before work starts - Clause 1 of the Haven Standard. The 365-Day Done Right Promise covers the workmanship, and we document the condition of the substrate, the fastener pattern, and the completed repair with a photo record you receive before we leave.

DIY or Call Us?

There’s a safe middle ground here. A homeowner can check the attic for active dripping during rain, photograph the ridge vent from a ladder for clip condition, and verify whether leftover shingle bundles are stored in the garage - all useful information that saves diagnostic time. What we do not recommend: walking a pitched roof to inspect valleys, removing ridge vent sections, or attempting to seal metal roofing fasteners from above. The fall risk on even a moderate 6:12 pitch is real, and stepping on a compromised Barrette shingle in cool morning weather (when they’re brittle) will crack adjacent tabs and expand the repair scope.

We’ve worked on enough Redwood City roofs to know where the Barrette systems fail predictably. Call (650) 560-7228 and we’ll schedule a free estimate with a written price before anyone picks up a tool.

FAQs