Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterTrusted Fence Installation for Redwood City Homeowners
Most Redwood City Fence Installation runs $3,500-$9,000 for a standard residential project, with vinyl and aluminum falling toward the lower end and custom iron or hardwood privacy fences climbing higher. We’re Rowan Construction Group, and we’ve been delivering flat-written prices on fence projects since 2007, with over 4,000 jobs completed under The Haven Standard. Our crews are background-checked, uniformed, and carry a documented photo record on every visit, so you see what we found and what we did, not just a final invoice. Call (650) 560-7228 to schedule your free estimate, and we’ll put the number in writing before anyone picks up a post-hole digger.
What Our Fence Installation Service Includes
Wood Fence Installation
Wood fencing remains the most requested material in Redwood City’s older neighborhoods, from the Craftsman bungalows near downtown to the hillside homes above Farm Hill Boulevard. We build with pressure-treated Douglas fir, redwood, and cedar, specifying grade and fastener type in the written quote so there’s no substitution at install. Our crews account for Redwood City’s clay-heavy soils in post-setting depth, typically 36 inches for a 6-foot privacy fence to prevent the leaning we see on DIY jobs after the first wet season.
Chain Link Fence Installation
Chain link solves the need for security and boundary definition without blocking sight lines, which matters on corner lots in Mount Carmel and along the commercial corridors near El Camino Real. We specify gauge, coating, and framework diameter in the quote, galvanized or vinyl-coated, and we set terminal posts in concrete at 8-foot centers with proper tension wire. For Redwood City properties with dogs or pool enclosures, we add bottom tension wire and self-closing gates with magnetic latches, noted line by line in the scope.
Vinyl Fence Installation
Vinyl fencing in Redwood City’s coastal climate resists the salt air and UV exposure that degrades wood faster than inland markets. We source from manufacturers with 20-year fade warranties and install with aluminum or steel reinforced bottom rails to prevent the sagging that vinyl shows after five years if underspecified. Our quotes break out the post spacing, rail reinforcement, and gate hardware separately so you see where the money goes.
Aluminum Fence Installation
Aluminum ornamental fencing gives the wrought-iron look without the rust maintenance, popular in Emerald Lake Hills and the flat lots near Redwood Shores where curb visibility matters, and we provide the same quality Fence Installation in Palo Alto. We use AAMA 2604 powder-coated extrusions with stainless steel fasteners, and we specify wall thickness in the quote, typically .065 inch for residential and .125 inch for commercial or pool code applications. Every aluminum fence we install in Redwood City comes with a written warranty against chalking, fading, and structural failure.
Iron Fence Installation
Wrought iron and steel ornamental fencing suits historic properties and custom architecture, particularly in the Woodside Plaza area and along Alameda de las Pulgas where homes carry established character. We fabricate to spec or source from pre-designed lines, always specifying steel grade, welding method, and finish system, hot-dip galvanized plus powder coat for the 15-year corrosion protection Redwood City’s marine layer demands. Custom iron work requires a signed drawing before fabrication begins, with no change proceeding without a signed change order.
Fence Repair
Fence repair in Redwood City covers rot replacement, post resetting, gate rehanging, and panel replacement after wind events or gradual soil movement. We photograph the damage, quote the repair versus replacement cost, and proceed only with a written scope, because partial repair of a failing fence line is sometimes the expensive choice. In the hills above Jefferson Avenue, we regularly find retaining-wall-integrated fences where the wall failure caused the fence failure, and we diagnose both conditions before quoting.
Privacy Fence Installation
Privacy fencing in Redwood City’s denser neighborhoods, from Centennial to Roosevelt, requires attention to height restrictions, setback rules, and neighbor notification protocols. We build with solid board, board-on-board, or shadowbox configurations, specifying the sightline blockage percentage in the quote, and we verify permit requirements with the city before work starts. Redwood City allows 6 feet in side and rear yards, 3 feet in front yards, with exceptions requiring planning approval, which we handle as part of the project scope when needed.
Fence Gates Installation
Gate installation is where fence projects succeed or fail, the point of highest mechanical stress and most frequent callback. We specify hinge type, latch type, and frame reinforcement in every quote, with self-closing springs and magnetic latches for pool code compliance, and we set gate posts in concrete deeper than line posts to prevent the sag that binds gates in Redwood City’s expanding clay soils. Double-drive gates get a steel frame and center drop pin, always noted in the written scope.
Commercial Fencing
Commercial fencing in Redwood City serves office parks along Veterans Boulevard, retail sites on Broadway, and industrial properties near Seaport Boulevard with security, aesthetic, and code compliance requirements, and we also offer our Fence Installation in Menlo Park for similar commercial needs. We install chain link with barbed wire or razor ribbon, ornamental aluminum, and crash-rated barriers, pulling permits and scheduling inspections as specified in the project scope. Every commercial job gets the same flat-written price and documented photo record as our residential work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Fence Installation
We’ve installed and repaired fencing with materials from CGI and CWS, two manufacturers whose aluminum and vinyl systems we specify regularly for Redwood City properties requiring coastal-grade corrosion resistance. With CGI, we’ve completed dozens of ornamental aluminum installations where the powder-coat finish and extrusion wall thickness met the 15-year performance standard we warranty. CWS vinyl systems account for a growing share of our privacy fence work, particularly in neighborhoods where homeowners want the wood appearance without the maintenance cycle.
We also work with ECO Window Systems materials for integrated fence and gate projects where the gate hardware and latching systems must coordinate with other exterior finishes. Our sourcing depth across fifty-plus vetted brands means the written quote carries honest numbers rather than inflated ones, because we know the material cost before we price the job. Whether you have CGI, CWS, ECO Window Systems, or any other make, we can help.
Before
AfterSigns You Need Fence Installation Right Now
- Posts leaning or heaving from the ground. In Redwood City, clay soil expands when wet and contracts in dry months, gradually loosening posts set at insufficient depth or without proper drainage gravel. Leaning posts transfer stress to rails and panels, and the repair cost rises sharply once the fence line cascades.
- Rot at the base of wood posts or bottom rails. Redwood City’s morning marine layer keeps fence bases damp year-round, and even pressure-treated wood fails when the treatment line is below grade or the post sits in standing water. We replace with proper post-base detail and specify rot-resistant species or alternative materials.
- Gate binding, sagging, or failing to latch. A gate that won’t close is a security failure, and the cause is usually frame distortion, hinge pull-out from an underspecified post, or soil movement shifting the post position. We diagnose whether the gate, the post, or both need replacement before quoting.
- Visible rust on metal components or coating failure. Once powder coat or galvanizing is compromised, corrosion accelerates in Redwood City’s salt air, particularly within a mile of the bay. Early intervention with proper surface prep and recoat, or component replacement, prevents structural failure.
- Neighbor disputes or code enforcement notices. Redwood City requires permits for fences over 6 feet, and setback violations can trigger planning enforcement. We verify property lines, easements, and height restrictions before building, and we pull permits and pass inspections as part of the written scope.
Our Fence Installation Process - Step by Step
- 1
Site visit and measurement. We walk the property line with you, locate utilities through USA North 811, and photograph existing conditions. In Redwood City’s hillside areas, we note slope, drainage patterns, and retaining wall integration that affect post depth and panel configuration.
- 2
Written quote with line-item scope. Under Clause 1 of The Haven Standard, the price is written before anyone starts. The quote specifies material grade, post spacing, concrete volume, gate hardware, and permit fees if applicable, with no aggregate lump sums that hide substitutions.
- 3
Permit application and utility clearance. We pull the Redwood City building permit and schedule USA North clearance, providing you the permit number and inspection schedule. For properties near Caltrain right-of-way or utility easements, we coordinate with the affected agency before breaking ground.
- 4
Installation with documented progress. Crews arrive in uniform, background-checked, with a photo record of post holes, concrete placement, and finished grades. You receive the photo documentation at project closeout, standard, not an upgrade.
- 5
Final inspection and written warranty. We schedule the city inspection, correct any punch-list items, and deliver the 365-Day Done Right Promise with terms page, not an asterisk. If it’s not done right, Rowan makes it right.
How Much Does Fence Installation Cost in Redwood City?
A typical vinyl fence installation in Redwood City runs $3,500-$9,000 for 150 linear feet of 6-foot privacy fencing, with wood privacy slightly higher for redwood or cedar, aluminum ornamental falling in the $4,000-$10,000 range, and custom iron climbing above that depending on design complexity. Chain link for a standard backyard runs lower, around $2,500-$5,500 for the same footage, with commercial-grade or vinyl-coated versions at the upper end.
Several factors move the price within these ranges. Slope adds labor for stepping or racking panels to follow grade. Rock or compacted fill requires powered augers or hand digging, which we note in the quote after probing the soil. Gate quantity and type, single versus double, manual versus automated, add hardware and labor costs we break out separately. Redwood City’s permit fees, typically $200-$400 for residential fences, appear as a line item, not buried in overhead.
To avoid overpaying, get the material grade and fastener specification in writing, not just “wood fence” or “aluminum fence.” Substituting #2 grade for clear heart redwood, or .040 inch wall for .065 inch aluminum, can cut a contractor’s cost 30 percent without you knowing. Our quotes name the spec, the brand, and the quantity, so you can compare apples to apples.
Every free estimate includes the site visit, measurement, written scope, and flat price valid for 30 days. Bring a competitor’s written quote and we’ll review it line by line at no charge, our standing Free Second Opinion offer. Call (650) 560-7228 to schedule.
Fence Installation Near Redwood City - Our Service Area
We install fences throughout Redwood City and neighboring communities, with typical response times of same-day or next-day for estimates in San Carlos, Menlo Park, Belmont, and Emerald Lake Hills. Our crews regularly work in San Mateo, Woodside, and Palo Alto, and we handle projects as far south as Mountain View, Los Altos, and Sunnyvale, and east to Hayward for larger commercial scopes. For Fence Installation in San Carlos or Fence Installation in Menlo Park, the same flat-written pricing and documented photo record apply. If you’re unsure whether your property falls within our service area, call (650) 560-7228 and we’ll confirm.
Serving Redwood City, CA - Our Local Coverage Area
We’re based in the Redwood City area and also handle Fence Installation - San Carlos, so we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Fence Installation in Redwood City
Fence installation is the construction of a boundary structure using posts set in concrete, horizontal rails, and infill panels or pickets, with gates for access. A complete installation includes site measurement, utility clearance, permit pulling if required, post setting, panel attachment, gate hanging, and final grading. Our scope always specifies material grade, fastener type, and concrete volume in writing before work begins.
A standard 150-linear-foot residential fence in Redwood City takes 2-3 days for vinyl or wood, 3-4 days for aluminum or iron with custom fabrication, and 1-2 days for chain link. Permitting adds 1-2 weeks before construction starts, which we handle and schedule around. Call (650) 560-7228 for a timeline based on your specific scope, estimates are free.
Most residential fence installation in Redwood City costs $3,500-$9,000 for standard materials and heights, with vinyl and chain link at the lower end and custom hardwood or ornamental iron at the upper end. Commercial and security fencing, automated gates, and steep slopes add cost we break out line by line. Call (650) 560-7228 for an exact quote, estimates are free.
Yes, we install and repair fencing with materials from CGI, CWS, and ECO Window Systems, among fifty-plus vetted brands in our sourcing network. Our quotes specify the manufacturer and product line when you request it, and we honor existing warranties where applicable. Call (650) 560-7228 to confirm availability for your specific brand and model.
We prioritize fence repairs that create security or safety hazards, such as gate failures, storm-damaged sections, or pool code violations, with same-day or next-day response when the condition warrants it. Non-urgent repairs are scheduled within our standard workflow, typically 3-5 business days. Call (650) 560-7228 to describe the condition and we’ll triage accordingly, estimates are free.
Every fence installation carries our 365-Day Done Right Promise, backed by The Haven Standard with a terms page, not an asterisk. If it’s not done right, Rowan makes it right. Manufacturer warranties on materials, typically 15-20 years on vinyl and aluminum, run in addition to our workmanship guarantee. The warranty terms are printed on every page of your project documentation.
Clear vegetation and movable objects from the fence line, mark any private utilities like irrigation or lighting not covered by USA North, and notify neighbors if the fence runs on a shared boundary. We handle the formal utility clearance, permit application, and property line verification. Call (650) 560-7228 before you start clearing, and we’ll guide you through preparation specific to your site, estimates are free.
Schedule Your Fence Installation Service in Redwood City Today
Call (650) 560-7228 to schedule your free estimate. We’ll visit your property, measure the line, and deliver a flat-written price with line-item scope before any work starts, every time, under Clause 1 of The Haven Standard. Our crews are background-checked and uniformed, a live person answers calls 24/7, and every visit includes a documented photo record as standard. The 365-Day Done Right Promise applies to every fence we build in Redwood City.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Redwood City since 2007.