Techo-Bloc Home Additions & ADU Nationwide

Techo-Bloc Home Additions & ADU: The Redwood City Owner’s Guide

We stock and install Techo-Bloc-compatible paver systems for home additions and ADU hardscaping in Redwood City, with typical installed pricing from $45,000 to $130,000 for full addition projects and $90,000 to $220,000 for standalone ADU construction. Most Techo-Bloc paver consultations can be scheduled within 48 hours, and we carry sample boards and common coping profiles on our truck for same-day specification. Homeowners usually discover an issue when settling or staining appears where the new addition meets the existing structure, or when water pools against a Techo-Bloc patio that was supposed to drain toward a perimeter channel.

Call (650) 560-7228

Which Techo-Bloc Models This Applies To

Techo-Bloc’s hardscape lines break into a few categories that matter for additions and ADUs. The Blu and Blu Grande smooth-surface slabs are common for modern ADU patios and walkways in Redwood City’s flatter lots near the Bayshore. Antika and Villagio flagstone-pattern pavers show up more in the Stambaugh-Heller neighborhood, where owners want the new addition to read like the original 1920s craftsman. Para and Para XL handle vehicular loads for driveway expansions tied to garage conversions.

To identify your existing Techo-Bloc, flip a loose paver if you have one. The production stamp shows the series name, the Quebec plant code, and the batch date. For fixed installations, measure the thickness: pedestrian pavers run 60mm, vehicular 80mm, and permeable systems like Aquastorm vary by base depth. The OEM spec matters because Techo-Bloc’s color blends are proprietary; a generic “gray paver” won’t match the Champlain Grey or Onyx Black you have in place. We source factory-direct for repairs and carry matching samples from recent Redwood City jobs to verify before ordering.

Signs Your Techo-Bloc Home Additions & ADU Is Failing

• Stepping or lippage between pavers. The bedding sand has washed out or the edge restraint failed, often where downspouts dump directly onto the patio. In Redwood City, our clay-heavy soils shift with winter rains and summer dry spells, so a 4-inch compacted base that held in year one may settle by year five.
• White haze or efflorescence blooming on the surface. Calcium salts migrate through the concrete matrix when water moves through the paver body. Techo-Bloc’s denser mixes resist this better than generic pavers, but poor drainage or a low spot in the base accelerates it anyway.
• Cracking concentrated at the addition tie-in. The new foundation settled at a different rate than the original structure, stressing any rigid hardscape bridging the gap. We see this where ADU slabs abut older footings without an expansion joint or where the geotechnical prep skipped the 12-inch over-excavation our soils often need.
• Joint sand washing out repeatedly. Polymeric sand breaks down when installed over a damp base or when the joints are overfilled. Techo-Bloc recommends a 1/8-inch joint depth below the chamfer; installers rushing to finish often leave it flush, and the seal washes away in the first hard rain.
• Spalling or surface delamination on coping or step treads. De-icing salts are rare here, but fertilizer runoff from adjacent planting beds does similar damage. The Techo-Bloc Rocka and Industria lines hold up better than their polished finishes in these conditions.

Before

After

Replacement Cost & What’s Included

Full Techo-Bloc home addition hardscaping in Redwood City runs $45,000 to $130,000 depending on square footage, structural tie-in complexity, and whether we’re matching existing grade or building retaining walls for a sloped lot. ADU construction with integrated Techo-Bloc patios and walkways starts at $90,000 and can reach $220,000 for detached units with full utility connections.

What drives the range: excavation and disposal of existing concrete or failed pavers ($3-$8 per square foot), base material depth (6 inches minimum for pedestrian, 10 inches for vehicular), the Techo-Bloc series selected (textured and large-format units run higher per square foot than standard), and whether permits require engineered drawings for retaining walls over 4 feet. Every quote we write itemizes these line items before work starts. Under Clause 1 of the Haven Standard, that written price is fixed; no change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation, and Techo-Bloc’s limited lifetime warranty covers the product itself against manufacturing defect.

DIY or Call Us?

An owner can safely check a few things. Verify whether the settling is cosmetic (a single paver rocked loose) or structural (a depression you can measure with a level). Look for the Techo-Bloc stamp on any loose unit to confirm the series. Check that downspouts discharge at least 6 feet from the hardscape edge.

Where DIY goes wrong: base preparation is the whole job. Renting a plate compactor and dumping road base is not the same as compacting in 4-inch lifts with a nuclear density gauge check. Techo-Bloc’s installation specs require a 95% modified Proctor density; most rental equipment and untrained operators hit 85% and call it done. The patio looks fine in month three and fails by month eighteen. We pull permits, coordinate inspections, and document the base prep with photos you’ll receive as part of the standard record. For anything involving structural tie-ins, retaining walls, or ADU utility trenches, call (650) 560-7228 and we’ll schedule a free estimate with a written price.

FAQs